BOBCAT Error Code Logo

Bobcat 553 Error Codes

Bobcat 553 Error Codes were written to give the owner / operator instructions on the safe operation and maintenance of the Bobcat vehicle.

Viewing Service Codes At Bobcat 553

Press the Information button to cycle the data display until the service code screen is displayed. If more than one service code is present, the codes will scroll on the data display.

Bobcat 553 Vehicle

Technical specifications:

Production year model/type	1995-2006
Engine:	Kubota
Cil/Turbo/intercooler: 	3
Engine model: 	D1105-B
Capacity in Kw/pk/Rpm:	18.4/25/3000
Maximum torque: Nm/rpm:	x
Displacement (cm)	1100
Fuel: 	Diesel
Transmission:	Hydrostatic, 4-wheel drive

Hydrauliek system:

Capacity hydraulic tank (liter)	x
Capacity hydraulic system (liter)	x
Pump flow capacity: (ltr/min) 	41,6
Maximum working pressure: (bar)	x

Dimensions with bucket:

Operating weight with st. bucket: (kg)	1737
Overal lenght with st. bucket (mm)	2725
Width over tires (mm)	1194
Machine width with st. bucket (mm)	1255
Height to top of cab (mm)	1842
Tires:	27x8,5-15
Wheelbase lenght: (mm)	790
Turning radius from center: (mm)	1572
Bucket capacity struck (M)	x
Bucket capacity heaped (M)	x
Fuel tank (liter)	38


Bucket pin height at maximum lift: (mm)	2634
Normal loading capacity  (kg)	450
Static Tipping load (kg)	915
Travel speed low/high (km/h)	10,3


Always use the serial number of the loader when requesting service information or when ordering parts. Early or later models (identification made by serial number) may use different parts, or it may be necessary to use a different procedure in doing a specific service operation.

Serial Number

Bobcat 553 serial number plate is located on the outside of the loader frame.

Explanation of Serial Number:

  1. The four digit Model / Engine Combination Module number identifies the model number and engine combination.
  2. The five digit Production Sequence Number identifies the order which the loader is produced.

Bobcat 553 Error Code List

View list of Bobcat 553 model fault codes.

Totally 3843 bobcat fault codes.


AF - Air Filter

b - Battery

FUEL - Fuel Level

HC - Hydraulic Oil Temperature

HF1 - Hydraulic Charge Filter

HF2 - Engine Return Filter

EC - Engine Coolant Temperature

ECL - Engine Coolant Level

EP - Engine Oil Pressure

ES - Engine Speed

HP - Hydraulic Oil Pressure

uP - BOSS Warning

-1 - Shutdown (Engine can be restarted for 30 second periods to move loader)

-2 - Warning

-3 - Wiring Not Connected

-4 - Wiring Shorted

-5 - High Sensor Voltage

-6 - No Signal

-7 - Out of Range

About | Contact | Privacy

Copyright © 2019 All rights reserved.

Bobcat Error Code

This website is not official or registered website. Please go official Bobcat website.

Sitemaps : 1-2-3-4-5